Blog

How to effectively clean and restore grayed, weathered wood?

Техническое сопровождение импра impra
Оцініть це post

As you know, over time, wood has the properties of aging – a natural process that occurs under the influence of many factors – the influence of ultraviolet radiation, rain, snow, wind, temperature changes, etc., which is manifested in the gradual loss of color of the fibrous structure of the upper layers of wood.

As a result, the wood is gray and unattractive in appearance.

How to restore the color of wood?

Buy Holzentgrauer

Effective cleaning and restoration of gray wood is possible with the Impra Profilan® product – Holzentgrauer . It is a professional highly efficient cleaning concentrate for cleaning, restoring and lightening weathered and shaded wood outdoors.

Using Impra Profilan® – Holzentgrauer will ensure careful removal of dirt, gray and green coating on the surfaces of wooden terraces, decking, paneling, garden furniture and other elements of coniferous, deciduous and exotic wood.

Due to the presence of oxalic acid in its composition, Profilan® – Holzentgrauer is able to restore the original color of wood without destroying its structure.

impralan Decklack D400 – лак для дерева з металічним ефектом та захистом MAX

587.00 for 1 liter

impralan Decklack D400 — лак для дерева з металічним ефектом та захистом MAX, на водній основі для покриття деревини, використовується зовні і всередині приміщень. Лак з металічним ефектом для створення прозорого або криючого покриття.

Підкреслює структуру деревини і надає натуральний вигляд металічного єфекту або натуральний вигляд посірівшої деревини. Створює міцне покриття і забезпечує довготрівалий захист для запобігання появі плісняви та водоростей.

Properties of Rrofilan®-Holzentgrauer:

  • thixotropic;
  • Has a slight odor during application;
  • effectively restores the color of wood;
  • Simple and easy to apply.

The process of cleaning browned wood

The wood should be prepared before the treatment – clean with dust with a brush, strong dirt can be pre-washed with water.

Depending on the degree of shrinkage of the wood, it is possible to apply in the form of concentrate (consumption about 150-200 ml / m2), or dilute with water 1: 5 (consumption about 30-40 ml / m2).

The product should be applied along the direction of the fibers of the wood, using a brush or brush, leave for 10-20 minutes, and rinse thoroughly with water. Repeat the process as needed.

Wear safety gloves and goggles.

After cleaning and restoration, the wood surface is ready for further treatment with protective and decorative coatings.

    Leave a Reply

    Your email address will not be published. Required fields are marked *